Table of Contents
Advertisement
iNSTALLiNG THE PHoNE
i
nstalling tHe
NoTE: You must connect the handset battery before using the
cordless handsets.
CAUTioN: To reduce the risk of fire or personal injury, use only
the Thomson inc. approved model 5-2721 Nickel-metal Hydride
battery (Ni-MH), which is compatible with this unit.
1. Locate battery and battery door which are packaged together inside a plastic bag
and are separate from the handset.
. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.
NoTE: To ensure proper battery installation, the connector is keyed
and can be inserted only one way.
PrESS DoWN
firMLY
4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.
6. Place the handset in the charging cradle. Allow handset to charge for 16
hours prior to first use. if you do not properly charge the handset, battery
performance is compromised.
usb C
able
CAUTioN: for continued protection against the risk of shock,
use only the Thomson inc. approved USB cable 5-2726 which is
compatible with this unit.
For Ringtones, Calendar, and Phone Book download capabilities; make sure that the
provided USB cable is correctly installed into your computer (using the larger end of
the connector) and your handset (using the smaller end of the connector).
H
andset
i
nstallation
b
attery
battery
pack
black wire
red wire
13
Advertisement
Table of Contents
