Andset; Setting The Clock Time; Etting The - GE 27936 User Manual

3. Enter your 3-digit area code using the number keys.
4. Press the flash/program button to confirm.
S R

ETTING THE

1. Make sure the phone is OFF (not in TALK mode).
2. Press the flash/program button four times. SET RINGER TONE shows on
the display.
3. Press CID (up or down arrow) button or press the 1, 2, or 3 number key.
4. Select the desired ringer tone.
5. Press the flash/program button to confirm.
S R
ETTING THE
1. Make sure the phone is OFF (not in TALK mode).
2. Press the flash/program button three times. SET RINGER TONE shows
on the display.
3. Press CID (up or down arrow) button or press the 1, 2, or 3 number key.
4. Select the desired ringer tone.
5. Press flash/program button to confirm.
NOTE: The ringer tone can be set from both the handset and the base.
S C
ETTING THE
REMINDER: The clock time and date are programmed automatically when
the first Caller ID information is successfully received after setup.
1. Make sure the phone is OFF (not in TALK mode).
2. Press the flash/program button on the base five times. SET TIME
shows on the display.
3. Enter the hour and minutes using the number keys (0-9).
4. Press CID (up or down arrow) button to select AM or PM.
5. Press the flash/program button to confirm.
12
T
INGER ONE FROM THE
T
INGER ONE FROM THE
T
LOCK IME
B
ASE
H

ANDSET