Andset Sound Signals; Display Messages - GE 25860 User Manual

Handset Sound Signals
Signal
A long warbling tone (with ringer on)
Three short beeps (several times)
Single beep every 7 seconds
Two short beeps

Display Messages

The following messages shows the status of the phone, provides Caller ID
information, or helps you set up and use your phone.
ERROR
ENTER TEL NUMBR
ENTER NAME
DELETE ALL?
DELETE CALL ID?
DELETED
END OF LIST
NEW
UNKNOWN NAME/
CALLER/NUMBER
PAGING
BLOCKED CALL
28
Caller information is interrupted during
transmission, or the phone is excessively noisy.
Prompt telling you to enter a telephone number in
one of the 10 memory locations.
Prompt telling you to enter the name for one of
the 10 memory locations.
Prompt asking if you want to erase all
Caller ID records.
Prompt asking if you want to erase a Caller ID record.
Prompt confirming the Caller ID record is erased.
Indicates that there is no additional information in
Caller ID memory.
Indicates call or calls have not been reviewed.
The incoming call is from an area not serviced by
Caller ID or the CID information was not sent.
Indicates the page button on the base is pressed.
The caller's number is blocked from transmission.
Meaning
Signals an incoming call
Page signal
Low battery warning
Error tone