Table of Contents
Advertisement
registration
from the Phone Setting menu:
1. Use the
or
. Press the Select (SKL) button to enter the menu.
3. Use the
or
4. Press the Select (SKL) button to save your selection
5. If you select Yes, HOLD BASE MUTE WAIT FOR BEEP shows in the display. (Your
handset should be held near the base during registration process.)
6. Press and hold the MUTE button on the base. REGISTRATION... shows in the base
display. Registration Successful shows in both the handset and base displays.
Deregistration
from the Phone Setting menu:
1. Use the
or
. Press the Select (SKL) button to enter the menu.
3. Use the
or
4. Press the Select (SKL) button to save your selection
5. If you select Yes, the handset will automatically be deregistered. Successful
Deregistration shows in the display, followed by HANDSET NEEDS REGISTRATION
and PLEASE PUT HANDSET IN BASE.
6. Place handset in base to automatically re-register to base.
Global De-registration
If one or more handsets become lost, you should de-register all handsets to ensure
proper system operation. Follow the steps below to deregister all handsets at the
same time.
WArNiNG: it is not recommended that a handset be deregistered
unless absolutely necessary because once a handset is
deregistered, that handset's telephone features cannot be used
until the handset is re-registered.
NoTE: Before starting global deregistration procedure, let all
handsets set idle for 20 seconds.
1. Disconnect the power from the base by unplugging the DC connector on back of
base.
. Press and hold the MUTE button on the base again and reconnect the power.
3. Hold the MUTE button until base displays Deregister All Handsets.
button to scroll to Registration.
button to scroll to No or Yes. The default is No.
button to scroll to Deregistration.
button to scroll to No or Yes. The default is No.
9
Advertisement
Table of Contents
