Table of Contents
Advertisement
4. Press the Select (SKL) button to enter the submenu, Alarm On/Off shows on the
display.
5. Use the
or
6. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
Set Alarm Time
NoTE: Alarm must be activated to set time.
from the Alarm On menu:
1. Press the Select (SKL) button to enter the menu. Set Alarm shows on the display.
3. Use the number keys to enter the time, then use the
AM or PM. The default setting is 12:00AM.
4. Press the Select (SKL) button to save your setting. You will hear a confirmation
tone.
Snooze
from the Alarm On menu:
1. Use the
or
. Press the Select (SKL) button to enter the menu. Snooze On/Off shows on the
display.
3. Use the
or
Every 15 mintues, or Every 30 minutes. Off is the default setting.
4. Press the Store (SKL) button to save your selection. You will hear a confirmation
tone.
Set Cycle Time
from the Alarm On menu:
1. Use the
or
. Press the Select (SKL) button to enter the menu. Alarm shows on the display.
3. Use the
or
4. Press the Select (SKL) button to save your selection. You will hear a confirmation
tone.
NoTE: if you select Daily, the system will follow the current time
setting to turn on the alarm.
6
button to scroll to On or Off.
button to scroll to Snooze: Off.
button to select from Off, Every 5 minutes, Every 10 minutes,
button to scroll to Cycle: Once.
button to select Once or Daily. The default setting is Once.
or
button to select
Advertisement
Table of Contents
