I Nstalling The ..................................10 Hone Nstalling The Andset Attery; Base Station - GE 28300EE2 User Manual

Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before using the
cordless handset(s).
CAUTION: To reduce the risk of fire or personal injury,
use only the Thomson Inc. approved model GP80AAAHC - NiMH
1.2V 800mAh rechargeable Nickel-metal Hydride battery, which
is compatible with this unit.
1. Locate batteries and battery door which are packaged together inside a plastic
bag and are separate from the handset.
. Locate the battery compartment on the back of the handset.
. Insert the batteries.
4. Close the battery compartment by pushing the door up until it snaps into place.

Base Station

1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface near your personal computer.
System Requirements:
Recommended:
PC running Windows 000 or XP
1 GHz processor
56 MB RAM
0 MB free space on your hard drive
Cable, DSL or equivalent broadband
connection to Internet
Standard landline (RJ-11)
10
Minimum:
PC running Windows 000 or XP
400 MHz processor
18 MB RAM
10M free disk space on your hard drive
Internet Connection (either dial-up:
minimum .6 Kbps modem,
or any broadband: cable, DSL, etc.)