Internal Power Supplies - HP 2910 al Series Specification

QuickSpecs
Configuration
Note 2 If this switch is factory installed in HP Universal Racks, Then the J9583A#0D1 or J9583AZ is
required.
AMS then J9583AZ is required.
EMEA then J9583A#0D1 is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Note 3 Localization required on orders without #B2B or #B2C options.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and
Box Level CTO)

Internal Power Supplies

Power supplies included in base models.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
System (std 0 // max=2) User Selection (min 0 / max=2) per Chassis
HP 2-port 10GbE CX4 al Module
HP 2p 10GbE CX4 Fact Integrated al Mod
HP 2-port 10GbE SFP+ al Module
min=0 \ max=2 SFP+ Transceivers
HP 2-port 10GbE SFP+ Fact Integ al Mod
min=0 \ max=2 SFP+ Transceivers
HP 10GbE al Switch Interconnect Kit
HP 10GbE Fact Intg al Switch Intrcon Kit
Configuration Rules:
DA - 13280 Worldwide — Version 20 — December 12, 2013
HP 2910 al Switch Series
J9149A
J9149AZ
J9008A
See Configuration
Note:2
J9008AZ
See Configuration
Note:2
J9165A
J9165AZ
Page 10