Internal Power Supplies - HP 12500 Series Specification

QuickSpecs
Configuration

Internal Power Supplies

12508 and 12504 - System (std 0 // max 6) User Selection (min 3 // max 6)
12518 - System (std 0 // max 12) User Selection (min 6 // max 12)
HP 12500 2000W AC Power Supply
HP 12500 1800W DC Power Supply
Configuration Rules:
Note 1 Supported on Switches JC654A, JF431C and JF430C only.
Note 2 Supported on Switches JC655A, JC652A and JC653A only.
Remarks: 12504 and 12508 only - Default 6 power supplies and allow the user to change down to 3.
12518 only - Default 12 power supplies and allow the user to change down to 6.
The power module support load balancing and N+1/N+M redundancy. Deploying N+1 power redundancy
The total number of power modules (JF431C, JF430C) = Ceiling (total power load of the chassis/2000) + 1
For example, if the total load of the chassis is 3000 W, the number of power modules must be 2 + 1 = 3.
Deploying 1:1 power redundancy
JF431C-Requires 6 power modules.
JF430C-Total number of power modules = [Ceiling (total power load of the chassis/2000) ] x 2
For example, if the total power load of the chassis is 7000 W, the total number of power modules must be (4 + 1) x 2
= 10.
Localization is not required on these internal power supplies. Localization is covered on the PEMs listed below.
Localization
HP 12500 AC Power Entry Module - Chile - English localization
Power Cord: Quantity :6, CEI 23-50, C19 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet, Store Part# :8121-0923
HP 12500 AC Power Entry Module - U.S. - English localization
Power Cord: Quantity :6, NEMA 5-20P, C19 STRAIGHT, 125 V, 15 A, 2.5 meters, 8.21 feet, Store Part# :8120-
6361
HP 12500 AC Power Entry Module - Europe - English localization
DA - 13785 North America — Version 20 — January 16, 2014
HP 12500 Switch Series
JF429A
See Configuration
Note:1
JC651A
See Configuration
Note:2
JF426A#A1X
JF426A#ABA
JF426A#ABA
Page 12