Advertisement
QuickSpecs
Configuration
8 autosensing 10/100 ports
2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port or as a SFP slot
min=0 \ max=2 SFP Transceivers
1U - Height
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
Note 2
If this switch is factory installed in HP Universal Racks, Then the J9583A orJ9583A#0D1 is required.
EMEA then J9583A is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
Internal Power Supplies
No Power supplies
Cables
Multi-Mode Cables
DA - 13525 North America — Version 12 — November 12, 2013
HP 2520 Switch Series
See Configuration
Note:1, 2
J4858C
J4859C
J9054C
J9099B
J9100B
J4860C
J9142B
J9143A
J4858C
J4859C
J9054C
J4860C
J9142B
J9143B
J9099B
J9100B
Page 6
Advertisement
