HP 2910 al Series Specification page 49

QuickSpecs
Accessory Product Details
HP BLc SFP+ 3m 10GbE
Copper Cable (487655-
B21)
HP BLc SFP+ 5m 10GbE
Copper Cable (537963-
B21)
Connectivity
Physical characteristics
Environment
Electrical characteristics Notes
Notes
Services
Connectivity
Physical characteristics
Environment
Electrical characteristics Notes
Notes
DA - 13280 Worldwide — Version 20 — December 12, 2013
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
HP 2910 al Switch Series
9.84 ft. (3 m)
0.49 lb. (0.22 kg) the cable with an SFP+
transceiver at each end of the cable
32°F to 158°F (0°C to 70°C)
5% to 95%, noncondensing
14°F to 185°F (-10°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.04 watts maximum per transceiver end
www.hp.com/networking/services
16.40 ft. (5 m)
0.75 lb. (0.34 kg) the cable with an SFP+
transceiver at each end of the cable
32°F to 158°F (0°C to 70°C)
5% to 95%, noncondensing
14°F to 185°F (-10°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.04 watts maximum per transceiver end
for details on
Page 49