HP 2910 al Series Specification page 48

QuickSpecs
Accessory Product Details
HP BLc SFP+ 0.5m 10GbE
Copper Cable (487649-
B21)
HP BLc SFP+ 1m 10GbE
Copper Cable (487652-
B21)
Connectivity
Physical characteristics
Environment
Electrical characteristics Notes
Notes
Services
Connectivity
Physical characteristics
Environment
Electrical characteristics Notes
Notes
Services
DA - 13280 Worldwide — Version 20 — December 12, 2013
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Length
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Electrical Properties
• Cable Characteristic Impedance: 100 ohms
• Crosstalk between pairs: 2% max
• Time delay: 1.31 nsec/ft
Physical Properties
• Cable Diameter: 0.180"
• Minimum Cable Bend Radius: 1.0"
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 2910 al Switch Series
1.64 ft. (0.5 m)
.18 lb. (0.08 kg) the cable with an SFP+
transceiver at each end of the cable
32°F to 158°F (0°C to 70°C)
5% to 95%, noncondensing
14°F to 185°F (-10°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.04 watts maximum per transceiver end
www.hp.com/networking/services
3.28 ft. (1 m)
.24 lb. (0.11 kg) the cable with an SFP+
transceiver at each end of the cable
32°F to 158°F (0°C to 70°C)
5% to 95%, noncondensing
14°F to 185°F (-10°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.04 watts maximum per transceiver end
www.hp.com/networking/services
for details on
for details on
Page 48