Download Print this page

HP 2910 al Series Specification page 53

Hp 2910 al switch series
Hide thumbs Also See for 2910 al Series:

Advertisement

QuickSpecs
Accessory Product Details
HP X410 1U Universal 4-
post Rack Mounting Kit
(J9583A)
Notes
Services
Notes
Services
DA - 13280 Worldwide — Version 20 — December 12, 2013
The HP 630 RPS/EPS supports the HP 2910al and 3500yl-PoE+ Switches. The
HP Switch 5400zl Series is not supported.
The 630 RPS/EPS includes two 2-m RPS/EPS cables, which can bes used to
carry either RPS or PoE+ power to the switch.
Minimum software versions required: 2910al PoE+ switches require W.14.35
or later and 3500yl-PoE+ switches require K.14.52 or later
3-year, 4-hour onsite, 13x5 coverage for hardware (U9270E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U9271E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR854E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR855E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR857E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR858E)
3 Yr 6 hr Call-to-Repair Onsite (UW371E)
4 Yr 6 hr Call-to-Repair Onsite (UW372E)
5 Yr 6 hr Call-to-Repair Onsite (UW373E)
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520 Series,
E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620 Power
Supply
This universal rack mounting kit is design to fit the following racks: HP 10K
10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC
Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other
brands and models too.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 2910 al Switch Series
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
200-240 V power cords shipped with the 630
power supply have a wall plug rated as close to 13
A as specific country standards allow.
www.hp.com/networking/services
www.hp.com/networking/services
for details on
for details on
Page 53

Advertisement

loading

This manual is also suitable for:

2910-24g al2910-48g al2910-24g-poe+ al2910-48g-poe+ al