HP StoreOnce User Manual page 46

Table 1 1 Target appliance parameters
Target Appliance tab Some fields are editable.
Appliance Name
Product Class
Appliance Address
Serial Number
Command Protocol Port
Number
Data Protocol Port
Number
Available
Replication protocol
User Data Stored
Capacity
Free Space
Software version
System Time
Blackout window active
Blackout windows
To add a target appliance (administrators only)
1. Click Add Target Appliance.
Figure 1 Create new target appliance
2. Enter the Target Appliance Address.
46 Replication functions
This is the name that is used to identify the Target Appliance. You specify it on the Local
Appliance tab of the partner appliance.
The product class of the appliance, such as HP B6000 or HP 4430.
This is the IP address of the Target Appliance. You specify it when you add the Target
Appliance and may edit it later.
This is the serial number of the Target Appliance; it cannot be edited.
This is the port number that will be used for command protocol.
This is the port number that will be used for data protocol.
This field indicates whether the Target Appliance is available.
This identifies the replication protocol in use.
The amount of user data stored on the Target Appliance.
This shows the capacity of the Target Appliance.
This shows the amount of free space on the Target Appliance.
This shows the software version of the Target Appliance.
This shows the current system time.
This shows whether a blackout window is currently active. This means no replication will
occur.
Any blackout windows that have been specified will be reflected in this weekly calendar.
During these times, the selected Target Appliance is not available for replication.
Administrators may edit and delete blackout windows from here or from the Local Settings
tab.