HP StoreOnce User Manual page 29

None (no authentication)
Setting authentication to None provides a simple CIFS server configuration that allows
for the creation of shares with no authentication. Any user or computer can mount and
access the shares created on the HP StoreOnce Backup system with this setting.
User authentication
Setting authentication to User provides a method of securing the CIFS shares so that they
can be accessed only by specified users local to the CIFS Server. Once the server has
been set to User mode, it is possible to create new local users by selecting Create User.
See "Configuring user authentication" (page 30)
Active Directory (AD) authentication
Setting authentication to AD allows the CIFS server to join a Windows Active Directory
domain. Access to individual CIFS shares is then managed from the Windows domain
controller server which can provide the names of domain users that will have access. See
Configuring CIFS Server with AD and CIFS Share with AD domain users (page 31)
detailed instructions.
4. Make changes, as required, and click Update. You will be advised that if you update the CIFS
Server settings, any backup or restore jobs in progress for it will fail.
5. Click Continue (or Cancel).
NOTE: When switching authentication modes the user must log out and back into the
Windows client before the new authentication settings will work.
6. You are now ready to create CIFS NAS shares, see
Connecting to the NAS target device on Windows
To access the NAS CIFS target device from a Windows server on the network, enter in Windows
Explorer:
<StoreOnce server name>/<share name> or <IP address>/<share name>.
for detailed instructions.
Creating a CIFS share (page
for
37).
CIFS Server tab 29