Table of Contents
Advertisement
[SECURITY] menu
■ [REMOTE CONTROLLER]
z You can set the limitation on the control from
the remote control.
Enables the button operation from
[ENABLE]
the remote control.
Disables the button operation from
[DISABLE]
the remote control.
5) Press ▲▼ to select [ENABLE] or
[DISABLE], and press the <ENTER>
button.
6) When the confirmation is displayed,
select [OK] or [CANCEL], and press
the <ENTER> button.
Note
z When a button operation is performed on the device
set to [DISABLE], the [SECURITY PASSWORD]
screen is displayed. Enter the security password.
z The [SECURITY PASSWORD] screen will
disappear when the <MENU> button is pressed or
there is no operation for approximately ten seconds.
z The power cannot be turned off (the standby mode
cannot be set) if the operations of both [CONTROL
PANEL] and [REMOTE CONTROLLER] are set to
[DISABLE].
z When the setting has completed, the menu screen
will disappear. To operate continuously, press the
<MENU> button to display the main menu.
72 - ENGLISH
Advertisement
Table of Contents
