Table of Contents
Advertisement
Accessing from the Web browser
1) Start up the Web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the Web browser.
3) Enter the user name and the password.
z The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the
password is panasonic (lower case).
4) Click [OK].
z The [Projector status] page is displayed.
Note
z When you wish to control the projector via the Web browser, set [WEB CONTROL] to [ON] in [NETWORK
CONTROL] (
page 73).
z Do not perform setting or control simultaneously by starting up multiple Web browsers. Do not set or control the
projector from multiple computers.
z Change the password first. (
z The administrator rights allows to use all functions. The user rights only allows to use [Projector status]
(
page 76), confirmation of the error information page (
(
page 79), and [Change password] (
z Access will be locked for few minutes when an incorrect password is entered three times consecutively.
page 86)
page 86).
[NETWORK] menu
page 77), [Network status] (
page 78), [Basic control]
ENGLISH - 75
Advertisement
Table of Contents
