Table of Contents
Advertisement
[PICTURE] menu
[WHITE GAIN]
You can adjust the brightness of the white part of the
projected image.
1) Press ▲▼ to select [WHITE GAIN].
2) Press ◀▶ or the <ENTER> button.
z The [WHITE GAIN] individual adjustment
screen is displayed.
3) Press ◀▶ to adjust the level.
Operation
Increases the
Press
.
brightness of white.
Makes image
Press
.
natural.
[SYSTEM DAYLIGHT VIEW]
You can correct the image to the optimal vividness
even if it is projected under a bright light.
1) Press ▲▼ to select [SYSTEM
DAYLIGHT VIEW].
2) Press ◀▶ or the <ENTER> button.
z The [SYSTEM DAYLIGHT VIEW] individual
adjustment screen is displayed.
3) Press ◀▶ to switch [SYSTEM
DAYLIGHT VIEW].
z The setting will change as follows each time
you press the button.
[OFF] (No
correction)
[3] (High)
[SHARPNESS]
You can adjust the sharpness of the projected image.
1) Press ▲▼ to select [SHARPNESS].
2) Press ◀▶ or the <ENTER> button.
z The [SHARPNESS] individual adjustment
screen is displayed.
3) Press ◀▶ to adjust the level.
Operation
Press
.
Press
.
46 - ENGLISH
Adjustment
Adjustment
range
Maximum
value +10
Minimum
value 0
[1] (Low)
[2] (Medium)
Adjustment
Adjustment
range
Contours become
sharper.
0 - 15
Contours become
softer.
Note
z When the adjustment value is [15], press
to [0]. Also, when the adjustment value is [0], press
to set to [15].
[NOISE REDUCTION]
You can reduce noises when the input image is
degraded and noise is occurring in the image signal.
1) Press ▲▼ to select [NOISE
REDUCTION].
2) Press ◀▶ or the <ENTER> button.
z The [NOISE REDUCTION] individual
adjustment screen is displayed.
3) Press ◀▶ to switch [NOISE
REDUCTION].
z The setting will change as follows each time
you press the button.
[1] (Low)
[OFF] (No
correction)
Attention
z When this is set for an input signal with less noise,
the image may look different from what it originally
was. In such case, set it to [OFF].
to set
[2] (Medium)
[3] (High)
Advertisement
Table of Contents
