Miscellaneous Security Settings Menu - Lexmark CX510 User Manual

Understanding the printer menus

Miscellaneous Security Settings menu

Use
Login Restrictions
Login failures
Failure time frame
Lockout time
Panel Login Timeout
Remote Login Timeout
Security Reset Jumper
No Effect
Access controls="No Security"
Reset factory security defaults
LDAP Certificate Verification
Demand
Try
Allow
Never
Minimum PIN Length
1–16
To
Limit the number and time frames of failed login attempts from the printer control
panel before all users are locked out.
Notes:
•
"Login failures" specifies the number of failed login attempts before users are
locked out. Settings range from 1 to 10 attempts. "3 attempts" is the factory
default setting.
• "Failure time frame" specifies the time frame during which failed login
attempts can be made before users are locked out. Settings range from 1 to 60
minutes. "5 minutes" is the factory default setting.
•
"Lockout time" specifies how long users are locked out after exceeding the
login failures limit. Settings range from 1 to 60 minutes. "5 minutes" is the
factory default setting. 1 indicates that the printer does not impose a lockout
time.
•
Panel Login Timeout specifies how long the printer remains idle on the home
screen before automatically logging off the user. Settings range from 1 to 900
seconds. "30 seconds" is the factory default setting.
•
Remote Login Timeout specifies how long a remote interface remains idle
before automatically logging off the user. Settings range from 1 to 120
minutes. "10 minutes" is the factory default setting.
Adjust the security settings.
Notes:
•
No Effect means the reset has no effect on the printer security configuration.
•
Access controls='No Security' retains all the security information that the user
has defined. No Security is the factory default setting.
•
"Reset factory security defaults" deletes all security information that the user
has defined, and restores the factory default settings in the Miscellaneous
Security menu.
Allow the user to request a server certificate.
Notes:
•
"Demand" is the factory default setting. This means a server certificate is
requested. If a bad certificate is provided or if no certificate is provided, then
the session is terminated immediately.
• "Try " means a server certificate is requested. If no certificate is provided, then
the session proceeds normally. If a bad certificate is provided, then the session
is terminated immediately.
•
"Allow" means a server certificate is requested. If no certificate is provided,
then the session proceeds normally. If a bad certificate is provided, then it will
be ignored and the session proceeds normally.
•
"Never" means no server certificate is requested.
Limit the digit length of the personal identification number (PIN).
Note: 4 is the factory default setting.
146