Reports Menu; Universal Setup Menu - Lexmark CX510 User Manual

Understanding the printer menus

Universal Setup menu

Use
Units of Measure
Inches
Millimeters
Portrait Width
3–8.5 inches
76–215.9 mm
Portrait Height
3–14.17 inches
76–360 mm

Reports menu

Reports menu
Use
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
To
Specify the unit of measure.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the width for portrait orientation.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the U.S. factory default setting. You can increase the
width in 0.01‑inch increments.
• 215.9 mm is the international factory default setting. You can
increase the width in 1‑mm increments.
Set the height for portrait orientation.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the U.S. factory default setting. You can increase the
height in 0.01‑inch increments.
• 356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
To
Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Print a report containing printer statistics such as supply information and details
about printed pages.
Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu item appears only in network printers or printers connected
to print servers.
Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu item appears only when there is more than one network
option installed and only in network printers or printers connected to print
servers.
136