7.7.3 Hole locations
The figure below shows the outline of the drive including the hole locations.
(6X) 6-32 UNC
RIGHT
Figure 59. Mounting hole locations
(6X) 6.35 ±0.2
Recommended torque 0.6 - 1.0 Nm
Max allowable penetration of noted screw
to be 4.5 mm.
Max allowable penetration of noted screw
to be 4.0 mm.
Thickness of bracket
Deskstar 40GV & 75GXP hard disk drive specifications
(2X) 95.25 ±0.2
REAR
Screw 6-32 UNC
56
(4X) 6-32 UNC