UEC
F420
Servo: Unrecovered Seek error
1421
Servo: Recovered Track following error
F422
Servo: Unrecovered Track following error
1423
Servo: Recovered Track follow timeout
F424
Servo: Unrecovered Track follow timeout
1425
Servo: Recovered KT Seek out of range
F426
Servo: Unrecovered KT Seek out of range
1427
Servo: Recovered DAC Offset calibration error
F428
Servo: Unrecovered DAC Offset calibration error
1429
Servo: Recovered Load speed error
F42A
Servo: Unrecovered Load speed error
1501
Logical unit not ready
1502
Logical unit becoming ready
1503
Logical unit not ready - initializing command required
1504
Not ready - format in progress
1505
Not ready - self-test in progress
1506
Reassign failed
1507
Format failed
1508
Enclosure services not available (FC-AL only)
1509
Parameter list length error
150A
Invalid opcode in CDB
150B
LBA out of range
150C
Illegal request - invalid field in CDB
150D
Invalid LUN
150E
Illegal request - invalid field in parameter list
150F
Saved parameter not supported
1510
Unsupported log page
1511
Unsupported enclosure services function (FC-AL only)
1512
Invalid message (SCSI only)
1513
System buffer full
1514
Not ready to ready transition
1515
Login reset (FC-AL only)
1516
Power on reset
1517
SCSI bus reset (SCSI only)
1518
Bus device reset (SCSI only)
1519
Self initiated reset
151A
Tranceiver changed to single-ended (SCSI only)
151B
Tranceiver changed to LVD (SCSI only)
151C
Mode parameters changed
151D
Log parameters changed
Description
Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification
288