17.10.11.2 Long Format of Port Control Page
Table 86: Page 19 (Port Control Parameters) Long Format
Byte
7
0
PS
1
2
(MSB)
|
3
4
5
6
n
The drive maintain an independent set of port control mode page parameters for each SCSI initiator port.
•
Subpage Code indicates which subpage is being accessed. The drive support the following subpage codes. If the
Subpage Code is not supported or is not zero, the drive returns a CHECK CONDITION status, the sense key is set to
ILLEGAL REQUEST and the additional sense code set to ILLEGAL FIELD IN PARAMETER LIST..
- 01h: Margin Control Subpage
- 02h: Saved Training Configuration Values Subpage
- 03h: Negotiated Settings Subpage
- 04h: Report transfer Capabilities Subpage
- FFh: All supported subpages.
•
Page Length specifies the length in bytes of the subpage parameters after the Page Length.
•
Protocol Identifier has a value of 1h to indicate SPI SCSI devices.
6
5
4
Long=1
Subpage Code
Page Length (n-3)
RSVD
RSVD
Protocol Specific Mode Parameters
Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification
Bit
3
2
Page Code = 19h
Protocol Identifier = 1h
133
1
0
(LSB)
Default
39h
00h
|
00h
00h
01h