7.0 Electrical interface specification
7.1 Power connector
The power connector of 68-pin models complies with the SFF-8009 Rev. 2.0. Power pin assignment of 68-pin models is as
shown below.
80-pin SCA-2 models use a Molex p/n 87641-0021 or DDK p/n HD2PF80-A11 connector, and 68 pin models use DDK p/n
HDW-RB68124G connector, which is compatible with the specification of "Single Attachment for Small SCSI Disk Drives"
SPI-4 document, Annex C.
Power pin assignment of the 80-pin (SCA-2) model is shown in Section 7.2.2, "SCSI signal connector (80-pin SCA-2 model)"
on page 23.
4
3
2
Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification
Pin
Voltage
1
1
+12 V
2
GND
3
GND
4
+5V
21