1
1
1
0
The highest level error is reported at the end of transfer. Retries are attempted but ECC is not applied.
Recovered data are transferred with Check Condition status and Recovered Error sense key set at the end
of the transfer.
no err
soft err The transfer stops on the first soft error detected. The recovered error block is returned to the
hard err Data transfer stops on the unrecoverable error. The unrecoverable error block is not returned to
1
1
1
1
The highest level error is reported at the end of transfer. Retries are attempted but ECC in not applied.
Recovered or corrected data (if any) or both are transferred with Check Condition status and Recovered
Error sense key set at the end of the transfer.
no err
soft err The transfer stops on the first soft error detected. The information in the sense data shall contain
hard err Data transfer stops on the unrecoverable error. The unrecoverable error block is returned to the
The transfer length is exhausted.
initiator. The information in the sense data shall contain the LBA of the block in error.
the Initiator. The drive then creates the Check Condition status with the appropriate sense key.
The transfer length is exhausted.
the LBA of the block in error.
Initiator. The drive then creates the Check Condition status with the appropriate sense key.
Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification
118