17.24 RELEASE (17)
Table 134: RELEASE (17)
Byte
7
0
1
Reserved = 0
2
3-4
5
VU = 0
The RELEASE command is used to release a LUN previously reserved.
Note:
It is not an error for an Initiator to release a LUN that is not currently reserved. The drive returns Good status without
altering the reservation.
•
3rdPty bit indicates that
1
this release process is for a third party that is specified by 3rd Party ID.
0
this release process is for the Initiator itself.
•
3rd Party ID specifies the ID of the third party for which the LUN is reserved. (Refer to Section 17.29 "RESERVE
(16)" on page 181.)
•
Extents must be 0. Extension is not supported by the drive.
•
Reservation Identification field is ignored.
Hitachi Confidential
6
5
4
Command Code = 17h
3rdPty
Reservation Identification
Reserved = 0
Reserved = 0
Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification
Bit
3
2
3rd Party ID
175
1
0
Ext=0
FLAG
LINK