Hitachi HUS151473VL3800 - Ultrastar 73.4 GB Hard Drive Specifications page 135

1 0 0 1 The highest level error is reported at the end of transfer. Retries and error correction are attempted. Recov-
ered or corrected data (if any) or both are transferred with Check Condition status and Recovered Error
sense key set at the end of the transfer.
no err
soft err The transfer length is exhausted. Transferred data includes blocks containing recovered errors.
hard err Data transfer stops when an unrecoverable error is encountered. The unrecoverable block is
1 0 1 0 The highest level error is reported at the end of transfer. Retries are attempted but ECC is not applied.
Recovered or corrected data (if any) or both are transferred with Check Condition status and Recovered
Error sense key set at the end of the transfer.
no err The transfer length is exhausted.
soft err The transfer length is exhausted. Transferred data includes blocks containing recovered errors.
hard err Data transfer stops when an unrecoverable error is encountered. The unrecoverable block is not
1 0 1 1 The highest level error is reported at the end of transfer. Retries and error correction are attempted. Recov-
ered or corrected data (if any) or both are transferred with Check Condition status and Recovered Error
sense key set at the end of the transfer.
no err The transfer length is exhausted.
soft err The transfer stops on the first soft error detected. The information in the sense data shall contain
hard err Data transfer stops on the unrecoverable error. The unrecoverable error block is not returned to
1 1 0 0 The highest level error is reported at the end of transfer. Retries and error correction are attempted.
Recovered or corrected data (if any) or both are transferred with Check Condition status and Recovered
Error sense key set at the end of the transfer.
no err The transfer length is exhausted.
soft err The transfer stops on the first soft error detected. The information in the sense data shall contain
hard err Data transfer stops on the unrecoverable error. The unrecoverable error block is not returned to
1 1 0 1 The highest level error is reported at the end of transfer. Retries and error correction are attempted. Recov-
ered or corrected data (if any) or both are transferred with Check Condition status and Recovered Error
sense key set at the end of the transfer.
no err
soft err The transfer stops on the first soft error detected. The information in the sense data shall contain
hard err Data transfer stops on the unrecoverable error. The unrecoverable error block is returned to the
The transfer length is exhausted.
The information byte in the sense data will contain the LBA of the last recovered error.
transferred to the Initiator. The drive then creates the Check Condition status with the appropri-
ate sense key.
The information byte in the sense data will contain the LBA of the last recovered error.
transferred to the Initiator. The drive then creates the Check Condition status with the appropri-
ate sense key.
the LBA of the block in error.
the Initiator. The drive then creates the Check Condition status with the appropriate sense key.
the LBA of the block in error.
the Initiator. The drive then creates the Check Condition status with the appropriate sense key.
The transfer length is exhausted.
the LBA of the block in error.
Initiator. The drive then creates the Check Condition status with the appropriate sense key.
Hitachi Ultrastar 15K147 SCSI Hard Disk Drive Specification
117