Hitachi HTS542525K9SA00 Specifications page 126

10.22.1.4 Extended Status Code
Status Code
0000h
0001h
0002h
0003h
0004h
0005h
0006h
0007h
0008h
0009h
000Ah
000Bh
000Ch
000Dh
000Eh
000Fh
0010h
0011h
0012h
0013h
0017h
0018h-BFFFh
C000h-C002h
C003h
C004h
C005h
C006h
C007h-FFEFh
FFF0h-FFFEh
FFFFh
10.22.1.5 Data transfer
Once an SCT command has been issued, status can be checked and data can be transferred. Data transfer uses log
page E1h.
Definition
Command complete without error
Invalid Function Code
Input LBA out of range
Request sector count overflow. The number of sectors requested to
transfer (Sector Count register) in the read or write log command is
larger than required by SCT command.
Invalid Function code in Error Recovery command
Invalid Selection code in Error Recovery command
Host read command timer is less than minimum value
Host write command timer is less than minimum value
Background SCT command was aborted because of an interrupting
host command
Background SCT command was terminated because of unrecoverable
error
Invalid Function code in Long Sector Access command
SCT data transfer command was issued without first issuing an SCT
command
Invalid Function code in Feature Control command
Invalid Feature code in Feature Control command
Invalid New State value in Feature Control command
Invalid Option Flags in Feature Control command
Invalid SCT Action code
Invalid Table ID (table not supported)
Command was aborted due to drive security being locked
Invalid revision code
Blocking SCT Segment Access command was terminated because of
unrecoverable error
Reserved
Vendor Specific
Overlay switch failure in Long Sector Access command
Read Long failure
Write Long failure
Write Cache enable failure
Vendor Specific
Reserved
SCT command executing in background
Deskstar 7K160 Hard Disk Drive Specification
112