Write Dma (Cah/Cbh); Figure 122 Write Dma Command (Cah/Cbh) - Hitachi HTS541616J9AT00 - Travelstar 160 GB Hard Drive Specifications

2.5 inch ata/ide hard disk drive
Hide thumbs Also See for HTS541616J9AT00 - Travelstar 160 GB Hard Drive:
Table of Contents

Advertisement

14.43 Write DMA (Cah/CBh)

Command Block Output Registers
Register
Data
Feature
Sector Count
LBA Low
LBA Mid
LBA High
Device
Command
Error Register
7
6
5
4
CRC UNC
0
IDN
V
0
0
V

Figure 122 Write DMA Command (CAh/CBh)

The Write DMA command transfers one or more sectors of data from the host to the device, then the data is written
to the disk media.
The sectors of data are transferred through the Data Register 16 bits at a time.
The host initializes a slave-DMA channel prior to issuing the command. Data transfers are qualified by DMARQ
and are performed by the slave-DMA channel. The device issues only one interrupt per command to indicate that
data transfer has terminated and status is available.
If an uncorrectable error occurs, the write will be terminated at the failing sector.
Output Parameters To The Device
Sector Count
LBA Low
LBA High/Mid
H
R
Input Parameters From The Device
Sector Count
LBA Low
LBA High/Mid
H
Travelstar 5K160 (PATA) Hard Disk Drive Specification
7 6 5 4 3 2 1 0
- - - - - - - -
- - - - - - - -
V V V V V V V V
V V V V V V V V
V V V V V V V V
V V V V V V V V
- L - D H H H H
1 1 0 0 1 0 1 R
3
2
1
0
0
ABT T0N
AM
N
0
V
0
0
The number of continuous sectors to be transferred. If zero is specified, then 256 sectors
will be transferred.
The sector number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
The cylinder number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
The head number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
The retry bit, but this bit is ignored.
The number of requested sectors not transferred. This will be zero, unless
an unrecoverable error occurs.
The sector number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
The cylinder number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
The head number of the last transferred sector. (L=0) In LBA mode, this register
contains current LBA bits 24 - 27. (L=1)
168 / 188
Command Block Input Registers
Register
Data
Error
Sector Count
LBA Low
LBA Mid
LBA High
Device
Status
Status Register
7
6
5
4
BSY RDY
DF
DSC DRQ COR IDX ERR
0
V
V
V
7 6 5 4 3 2 1 0
- - - - - - - -
...See Below...
V V V V V V V V
V V V V V V V V
V V V V V V V V
V V V V V V V V
- - - - H H H H
...See Below...
3
2
1
0
-
0
-
V

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents