Security Unlock (F2H); Figure 94 Security Unlock Command (F2H); Figure 95 Security Unlock Information - Hitachi HTS541616J9AT00 - Travelstar 160 GB Hard Drive Specifications

2.5 inch ata/ide hard disk drive
Hide thumbs Also See for HTS541616J9AT00 - Travelstar 160 GB Hard Drive:
Table of Contents

Advertisement

14.31 Security Unlock (F2h)

Command Block Output Registers
Register
Data
Feature
Sector Count
LBA Low
LBA Mid
LBA High
Device
Command
Error Register
7
6
5
4
CRC UNC
0
IDN
0
V
0
0

Figure 94 Security Unlock Command (F2h)

This command unlocks the password and causes the device to enter device unlock mode. If power on reset or hard
reset is done without executing the Security Disable Password command after this command is completed, the
device will be in device lock mode. The password has not been changed yet.
The Security Unlock command requests to transfer a single sector of data from the host including information
specified in the following figure.
If the Identifier bit is set to master and the file is in high security mode then the password supplied will be compared
with the stored master password. If the file is in maximum security mode then the security unlock will be rejected.
If the Identifier bit is set to user, then the file compares the supplied password with the stored user password.
If the password compare fails then the device returns an abort error to the host and decrements the unlock attempt
counter. This counter is initially set to 5 and is decremented for each password mismatch. When this counter reaches
zero then all password protected commands are rejected until a hard reset or a power off.
Word
Description
00
Control word
bit 0
bit 1-15
01-16
Password
17-255
Reserved

Figure 95 Security Unlock Information

Identifier
Zero indicates that device regards Password as User Password. One indicates that device
regards Password as Master Password.
The user can detect if the attempt to unlock the device has failed due to a mismatched password as this is the only
reason that an abort error will be returned by the file AFTER the password information has been sent to the device.
If an abort error is returned by the device BEFORE the password data has been sent to the file then another problem
exists.
Travelstar 5K160 (PATA) Hard Disk Drive Specification
7 6 5 4 3 2 1 0
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - D - - - -
1 1 1 1 0 0 1 0
3
2
1
0
0
ABT T0N
AM
N
0
V
0
0
: Identifier (1-Mater, 0-User)
: Reserved
(32 bytes)
141 / 188
Command Block Input Registers
Register
Data
Error
Sector Count
LBA Low
LBA Mid
LBA High
Device
Status
Status Register
7
6
5
4
BSY RDY
DF
DSC DRQ COR IDX ERR
0
V
0
-
7 6 5 4 3 2 1 0
- - - - - - - -
...See Below...
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
...See Below...
3
2
1
0
-
0
-
V

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents