6.4
Mechanical specifications
6.4.1
Physical dimensions and weight
The following figure lists the dimensions for the drive.
Model
160 GB, 120 GB models
80 GB, 60 GB, 40 GB models
Table 15. Physical dimensions and weight
6.4.2
Mounting hole locations
The mounting hole locations and size of the drive are shown below.
Figure 2. Mounting hole locations
6.4.3
Connector and jumper description
A jumper is used to designate the drive address as either master or slave. The jumper setting method is described in
section 7.10, "Drive address setting" on page 58.
Connector specifications are included in section 7.2, "Interface connector" on page 41.
Travelstar 5K160 (PATA) Hard Disk Drive Specification
Height (mm)
9.5±0.2
9.5±0.2
Width (mm)
Length (mm)
69.85±0.25
100.2±0.25
69.85±0.25
100.2±0.25
30 / 188
Weight (gram)
102 Max
95 Max