Heading To A Settlement; Heading To A Point Of Interest - Delphi NA10000-11B1 - Mobile Navigation - GPS Receiver User Manual

6. When the unit has enough information, the details are
displayed. If you wish to change the intersection, simply
press or select "ESC" on the screen to re-enter
information.
7. Choose one of the following:
• Select "Save." This allows you to save the
destination as a shortcut or favorite. Refer to
section 9, beginning on page 29.
• Select "Show." The unit does not calculate the route,
but will simply display the address using the map
browser mode. From here, you can select this
address as your destination or navigate the map to
find another destination. Refer to the "Straight from
the map" segment on page 25.
• Select "Go." The unit calculates the route and
displays the intersection on the navigation screen.

Heading to a settlement

Directions to a "Settlement" will direct you to a common
town center (i.e., city hall).
1. From the main menu, select "Destination" and then
"Settlement."
2. Select "State." To enter a state, choose one of the
following methods:
• In the text entry screen, type in the name.
After you finish, position the cursor on the text
entry line. Press
• Use the up/down function of the eight-way toggle
button to choose from the list. Then press
confirm your selection.
3. Select "Settlement." As above, type in a town name or
choose from the list.
4. When the unit has enough information, the details are
displayed. If you wish to change the settlement, simply
press or select "ESC" on the screen to re-enter
information.
23
to confirm your selection.
to
5. Choose one of the following:
• Select "Save." This allows you to save the
destination as a shortcut or favorite. Refer to
section 9, beginning on page 29.
• Select "Show." The unit does not calculate the route,
but will simply display the address using the map
browser mode. From here, you can select this
address as your destination or navigate the map to
find another destination. Refer to the "Straight from
the map" segment on page 25.
• Select "Go." The unit calculates the route and
displays the destination on the navigation screen.

Heading to a point of interest

A point of interest is any named site, feature, landmark,
or public venue. There can be thousands of points of
interest in larger cities, so they are sorted into cate-
gories such as hotels, churches, schools, or parks.
1. From the main menu, select "Destination," then
"Points of Interest."
2. Select "Category." Use the left/right function of the
eight-way toggle button to cycle through the options.
3. Select "Type." This narrows down the number of
options. Use the left/right function of the eight-way
toggle button to cycle through the options.
4. Select "Area." To enter an area, choose one of
the following:
• In the text entry screen, type an area of interest.
After you finish, position the cursor on the text
entry line. Press
• Use the up/down function of the eight-way toggle
button to choose from the list. Then press
confirm your selection.
to confirm your selection.
to