Heading To An Intersection - Delphi NA10000-11B1 - Mobile Navigation - GPS Receiver User Manual

1. From the main menu, select "Destination" and then
"Address."
2. Select "State." To enter a state, choose one of the
following methods:
• In the text entry screen, type in the name.
After you finish, position the cursor on the text
entry line. Press
• Use the up/down function of the eight-way toggle
button to choose from the list. Then press
confirm your selection.
3. Select "Town." As above, type in a town name or
choose from the list.
4. Select "Road." A list of streets in your chosen town is
displayed. Type in or select the street name from
the list. If no road is selected, you will be directed to
the geographical center of the town.
5. When a road has been chosen that has street
numbers associated with it in the map database, the
"House No." field will be displayed. It will not display if
no road has been entered, or when there are no
house numbers associated with the selected road in
the map database. The house number will appear
with the road name whenever the road name is
displayed.
6. When the unit has enough information, the details are
displayed. If you wish to change the address, simply
press or select "ESC" on the screen to re-enter
information.
22
to confirm your selection.
to
7. Choose one of the following:
• Select "Save." This allows you to save the
destination as a shortcut or favorite. Refer to
section 9, beginning on page 29.
• Select "Show." The unit does not calculate the
route, but will simply display the address using the
map browser mode. From here, you can select this
address as your destination or navigate the map to
find another destination. Refer to the "Straight from
the map" segment on page 25.
• Select "Go." The unit calculates the route and
displays the address on the navigation screen.

Heading to an intersection

1. From the main menu, select "Destination" and
then "Intersection."
2. Select "State." To enter a state, choose one of the
following methods:
• In the text entry screen, type in the name.
After you finish, position the cursor on the text
entry line. Press
• Use the up/down function of the eight-way toggle
button to choose from the list. Then press
confirm your selection.
3. Select "Town." As above, type in a town name or
choose from the list.
4. Select "Int. of." A list of streets is displayed. Type in or
select one of the street names from the list.
5. Select "And." A list of streets that intersect with
the first street is displayed. Type in or select the
intersecting street name from the list.
to confirm your selection.
to