Subscribe to Our Youtube Channel
Related Manuals for Delphi NA20032 - Real-Time Traffic Kit
Summary of Contents for Delphi NA20032 - Real-Time Traffic Kit
- Page 1 Works with: • Lifetime Traffic Subscription • No Monthly Charges • No Activation or Renewal Fees • Clear Channel Service REAL-TIME TRAFFIC KIT...
-
Page 2: Warnings And Precautions
WARNING DANGER OF ACCIDENT When using your Delphi navigation system in a vehicle, it is your sole responsibility to install, secure and use the device in a manner that will not cause accidents, personal injury or property damage, or in any manner obstruct your view or interfere with operation of vehicle safety equipment. - Page 3 System Contents TRAFFIC SD CARD Lifetime SD Card Subscription IMPORTANT NOTE: If you purchased NAV200 (NA20067-11B1) or NAV300, proceed directly to step 4. TMC Antenna TMC Receiver Installing / Updating Traffic SD Card Note: SD card update is not required if you purchased NAV200 (NA20067-11B1) or NAV300 1) Remove the original SD card from your NAV200 portable navigation unit.
- Page 4 Other Delphi dashboard or friction mounting option should be used. Delphi does not take any responsibility for any fines or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)
- Page 5 TMC ready: TMC signals are being received. Using TMC TMC service provides the Delphi NAV200 or NAV300 with the latest traffic information to allow routes to be recalculated around traffic jams and other obstructions. If TMC is activated you may display the traffic information on screen.
- Page 6 1. Tap the icon. The TMC screen appears. 2. Use the icons to scroll through the messages. Each message contains the state, name (or highway number) of the affected street, the applicable section or area, and the kind of obstruction. 3.
- Page 7 Factoring TMC Into Navigation You can configure the Delphi NAV200 to take TMC information into account when calculating a route by using the Settings feature. If you have configured automatic modification, the following message appears while the system recalculates your route (lower LEFT).
- Page 8 You can also adjust your obstacle avoidance status at any time by following these steps: 1. Tap the icon. The TMC screen appears: 2. Use the icons to search for the obstacle. 3. Tap the Status button and select whether the selected obstacle is to be Avoided or Ignored.
Need help?
Do you have a question about the NA20032 - Real-Time Traffic Kit and is the answer not in the manual?
Questions and answers