Windshield Wiper And Washer Switch; Adjustable Intermittent Wiper Operation; Windshield Washer Operation - Hyundai Elantra Owner's Manual

B350A01A-AAT
WINDSHIELD WIPER AND WASHER
SWITCH
The windshield wiper switch has three posi-
tions:
1. Intermittent wiper operation
2. Low-speed operation
3. High-speed operation
NOTE:
To prevent damage to the wiper system, do
not attempt to wipe away heavy accumu-
lations of snow or ice. Accumulated snow
and ice should be removed manually. If
there is only a light layer of snow or ice,
operate the heater in the defrost mode to
melt the snow or ice before using the wiper.
1- 38
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
B350C01S-AAT
Adjustable Intermittent Wiper Adjustable Intermittent Wiper Adjustable Intermittent Wiper Adjustable Intermittent Wiper Adjustable Intermittent Wiper
Operation Operation
Operation Operation Operation
(1)
(2)
(3)
B350A01E
To use the intermittent wiper feature, place the
wiper switch in the "INT" position. With the
switch in this position, the interval between
wipes can be varied from 2 to 10 seconds by
turning the interval adjuster barrel.
B350B01A-AAT

Windshield Washer Operation

To use the windshield washer, pull the wiper/
3A9CA47
washer lever toward the steering wheel. When
the washer lever is operated, the wipers auto-
matically make two passes across the wind-
shield. The washer continues to operate until
the lever is released.
NOTE:
o Do not operate the washer more than 15
seconds at a time or when the fluid reser-
voir is empty.
o In icy or freezing weather, be sure the
wiper blades are not frozen to the glass
prior to operating the wipers.
o In areas where water freezes in winter,
use windshield washer antifreeze.
3A9CA06