Manual Operation; Air Intake Control Switch; Fan Speed Control Switch; Fresh Mode - Hyundai Elantra Owner's Manual

Pressing the OUTSIDE button displays the ambient
TEMP
temperature on the VFD.
B980A01Y-AAT

MANUAL OPERATION

The heating and cooling system can be con-
trolled manually as well by pushing buttons
other than the "AUTO" button. In this state, the
system sequentially works according to the
order of buttons selected.
The function of the buttons which are not se-
lected will be controlled automatically.
Press the "AUTO" button in order to convert to
automatic control of the system.
B980B01Y-AAT

Fan Speed Control Switch

The fan speed can be set to the desired speed
by pressing the appropriate fan speed control
button. The higher the fan speed is, the more air
is delivered. Pressing the "OFF" button turns
off the fan.
1- 62
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
B670C01E-AAT
Air Intake Control Air Intake Control Air Intake Control Air Intake Control

Air Intake Control Switch

(Without A.Q.S)
This is used to select fresh outside air or
recirculation inside air.
To change the air intake control mode, (Fresh
mode, Recirculation mode) push the control
button.

FRESH MODE (

the button goes off when the air intake control
is fresh mode.
RECIRCULATION MODE (
tor light on the button is illuminated when the air
intake control is recirculation mode.
HXD118C
With the "Fresh" mode selected, air enters the
vehicle from the outside and is heated or cooled
according to the function selected.
With the "Recirculation" mode selected, air
from within the passenger compartment will be
drawn through the heating system and heated
or cooled according to the function selected.
NOTE:
o It should be noted that prolonged opera-
HXD118G
o When the ignition switch is turned "ON",
) : The indicator light on
) : The indica-
tion of the heating system in "recircula-
tion" mode will give rise to fogging of the
windshield and side windows and the air
within the passenger compartment will
become stale. In addition, prolonged use
of the air conditioning with the "Recircu-
lation" mode selected may result in the
air within the passenger compartment
becoming excessively dry.
the air intake control will change to "
mode (regardless of switch position).
This is normal operation. The air intake
control operates in "AUTO" mode when
turning the ignition to the "ON" posi-
tion if the "AUTO" mode was used be-
fore shutting off the engine.
"