Front Fog Light Switch; Turn Signal Operation; Average Fuel Consumption; Distance To Empty - Hyundai Elantra Owner's Manual

2. AVERAGE FUEL CONSUMPTION

o This mode calculates the average fuel con-
sumption from the total fuel used and the
distance since the last average consump-
tion reset.
o The total fuel used is calculated from the
fuel consumption input.
o For an accurate calculation, drive more than
0.5 mile.
o The meter's working range is from 0.0 to 99.9
miles/gallon(MPG).

3. DISTANCE TO EMPTY

Distance to empty symbol
o This mode provides the estimated distance
to empty from the current fuel level in the fuel
tank and distance to empty symbol.
1- 36
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
o When refueling with more than 2 gallons, the
trip computer will recognize refueling has
occurred.
Average fuel
o For an accurate distance to empty, drive
consumption
more than 0.5 mile.
Odometer
B400B01E
o When the distance to empty is less than 30
miles, the distance to empty digits will dis-
appear and its symbol will flash.
NOTE:
o If the distance to empty is indicated "- -",
have the trip computer system checked
by your authorized Hyundai dealer.
o The distance to empty can differ from the
Distance to
actual tripmeter according to driving
empty
conditions.
o The distance to empty can vary accord-
Odometer
ing to the driving conditions, driving
pattern or vehicle speed.
HXDOM103
FLASHING
Odometer
HXDOM106
B360B01Y-GAT

FRONT FOG LIGHT SWITCH

(If Installed)
To turn on the front fog lights, place the switch
in the "ON" position. They will come on when
the headlight switch is in the first or second
position.
B340A01A-AAT
COMBINATION TURN SIGNAL, COMBINATION TURN SIGNAL, COMBINATION TURN SIGNAL,
COMBINATION TURN SIGNAL, COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM HEADLIGHT AND HIGH-BEAM
HEADLIGHT AND HIGH-BEAM HEADLIGHT AND HIGH-BEAM HEADLIGHT AND HIGH-BEAM
SWITCH SWITCH SWITCH SWITCH SWITCH

Turn Signal Operation

Turn Signal Operation Turn Signal Operation Turn Signal Operation Turn Signal Operation
Pulling down on the lever causes the turn
signals on the left side of the car to blink.
Pushing upwards on the lever causes the turn
signals on the right side of the car to blink. As
the turn is completed, the lever will automati-
cally return to the center position and turn off
the turn signals at the same time. If either turn
B360B01E