Hyundai Elantra Owner's Manual page 100

o Be sure that the cassette label is not loose
or peeling off or tape ejection may be diffi-
cult.
o Never touch or soil the actual audio tape
surfaces.
o Keep all magnetized objects, such as elec-
tric motors, speakers or transformers away
from your cassette tapes and tape player
unit.
o Store cassettes in a cool, dry place with the
open side facing down to prevent dust from
setting in the cassette body.
o Avoid repeated fast reverse usage to replay
one given tune or tape section. This can
cause poor tape winding to occur, and even-
tually cause excessive internal drag and
poor audio quality in the cassette. If this
occurs, it can sometimes be corrected by
fast winding the tape from end to end sev-
eral times. If this does not correct the prob-
lem, do not continue to use the tape in your
vehicle.
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
Head
B880A02E
o The playback head, capstan and pinch
rollers will develop a coating of tape residue
that can result in deterioration of sound
quality, such as a wavering sound. They
should be cleaned monthly using a com-
mercially available head cleaning tape or
special solution available from audio spe-
cialty shops. Follow the supplier's direc-
tions carefully and never oil any part of the
tape player unit.
o Always be sure that the tape is tightly wound
on its reel before inserting in the player.
Rotate a pencil in the drive sprockets to
wind up any slack.
Cotton applicator
SSAR042B
NOTE: NOTE: NOTE: NOTE: NOTE:
Look at a tape before you insert it. Look at a tape before you insert it. Look at a tape before you insert it. Look at a tape before you insert it. Look at a tape before you insert it.
If the tape is loose, tighten it by turning one If the tape is loose, tighten it by turning one If the tape is loose, tighten it by turning one If the tape is loose, tighten it by turning one If the tape is loose, tighten it by turning one
of the hubs with a pencil or your finger. of the hubs with a pencil or your finger. of the hubs with a pencil or your finger. of the hubs with a pencil or your finger. of the hubs with a pencil or your finger.
If the label is peeling off, do not put it in the If the label is peeling off, do not put it in the
If the label is peeling off, do not put it in the If the label is peeling off, do not put it in the If the label is peeling off, do not put it in the
drive mechanism. drive mechanism. drive mechanism.
drive mechanism. drive mechanism.
Do not leave tape sitting where they are Do not leave tape sitting where they are Do not leave tape sitting where they are
Do not leave tape sitting where they are Do not leave tape sitting where they are
exposed to hot, warm or, high humidity, exposed to hot, warm or, high humidity, exposed to hot, warm or, high humidity, exposed to hot, warm or, high humidity, exposed to hot, warm or, high humidity,
such as on top of the dashboard or in the such as on top of the dashboard or in the such as on top of the dashboard or in the such as on top of the dashboard or in the such as on top of the dashboard or in the
player. player. player. player. player.
If a tape is exposed to excessively hot or If a tape is exposed to excessively hot or
If a tape is exposed to excessively hot or If a tape is exposed to excessively hot or If a tape is exposed to excessively hot or
cold, let it reach a moderate temperature cold, let it reach a moderate temperature cold, let it reach a moderate temperature
cold, let it reach a moderate temperature cold, let it reach a moderate temperature
before putting it in the player. before putting it in the player. before putting it in the player. before putting it in the player. before putting it in the player.
SSAR053B
1- 91