Front Fog Light Switch (If Equipped) - Hyundai Getz Quick Reference Manual

Listed below are the examples of proper switch settings.
Loading condition
Driver only
Driver + front passenger
Full passengers (including Driver)
Full passengers (including Driver) + full trunk Loading
Driver + Maximum permissible loading
HOW TO REMOVE HEADLIGHT CONDENSATION / MOISTURE
• After heavy rain or washing, mist/moisture
can be formed inside headlight and
taillamps due to temperature difference
between lamp inside & outside.

FRONT FOG LIGHT SWITCH (IF EQUIPPED)

Fog lights are used to provide improved
visibility in fog, rain or snow, etc. The fog
lights will turn on when fog light switch is
pressed after the ignition switch is in the ON
position and the parking light is turned on.
To turn off the fog lights, press the switch
again.
FOR CLEAR VISIBILITY DURING DRIVING
Getz.indd 4
Switch Position
• To remove the moisture formed inside
the headlamp. Switch ON the headlamps
for 30 minutes and the moisture will
automatically disappear
minutes.
WIPER SPEED
The windshield wiper switch has three
positions: intermittent, low speed and high
speed. For mist (single wipe), move the
lever up one position.
0
0
1
2
3
within 30
4
4/10/08 8:21:53 PM