Dinion Infrared Imager
2.
NOTICE!
Remember to tighten the captive screws on the panel when you
finish the adjustments.
Figure 5.2 Controls for focal length, focus, and camera set-up
1
2
3
5.1.2
Adjusting the Focus and Focal Length
1.
2.
Bosch Security Systems, Inc.
Open the access panel. Now you can adjust the focus and
focal length (see Figure 5.2 below).
Note: Before you make any adjustments, you may need to
connect the camera to a monitor to view the changes to
the picture.
Focal length adjustment
Focus adjustment (zoom)
Advanced camera set-up controls - keypad
Use the top set screw (item 1, Figure 5.2) to adjust the
image focus:
–
Turn the set screw to the left to focus near (N) (zoom
in).
–
Turn the set screw to the right to focus far (F) (zoom
out).
Use the lower set screw (item 2, Figure 5.2) to adjust the
focal length (tele or wide):
–
Turn the set screw to the left for a wider field of view.
–
Turn the set screw to the right for a telephoto field of
view.
Manual Camera Settings | en
User Manual
F.01U.263.417 | 3.0 | 2012.01
25