Table of Contents
Advertisement
Dinion Day/Night Camera
4.4
Install menu structure
Item
Lens type
Lens Wizard
Comm
Alarm
Defaults
4.4.1
Lens Wizard submenu
Item
Detected lens
Set Backfocus
now
Bosch Security Systems
Selection
Auto,
Manual, DC-
iris, Video
Submenu
On, Off
Submenu
Submenu
Selection
Installation and Operation manual
Description
Auto: - the camera automatically
selects the type of lens.
Manual, DC-iris, Video modes: select
the matching lens type to force the
camera to the correct lens mode.
Select to optimize the camera-lens
combination backfocus point.
Communications enabled or disabled.
If Off, Bilinx communication is
disabled.
Program the alarm input and output
functionality.
Returns all settings for all modes to
factory defaults
Description
Shows the type of lens detected when
auto lens detection is used.
Select to fully open the iris. Follow the
instructions below for setting the
backfocus for your particular lens type.
After focusing the object of interest
remains in focus under bright and low
light conditions.
Configuration | en
F.01U.163.823 | v1.0 | 2010.01
27
Advertisement
Table of Contents
