A&D UC-321 Instruction Manual page 9

Comparing a Current Weight with a Preset Target Weight
1
Set the slide switch to "TARGET".
2
Press the measurement switch gently.
The stored target weight is displayed.
3
Step on the scale.
When 0.00 kg and the
displayed, step on your scale
gently.
The measurement is started when
the mark disappears. Remain still
during the measurement.
If 0.00 kg is displayed for approxi-
mately ten seconds, the scale is au-
tomatically turned off.
4
The difference between the pre-
set target weight and the current
weight is displayed.
The scale is automatically turned off
after the difference is displayed for ap-
proximately five seconds.
5
Step off the scale.
mark are
- 9 -