A&D UC-321 Instruction Manual page 5

Measuring a Baby or an Animal
1
Set the slide switch to "WEIGHT".
2
Press the measurement switch gently
and immediately step on your scale.
With all of the display segments indicated (sev-
eral seconds) and before 0.00 kg appears, step
on the scale without any baby or animal in your
hands. Wait for 0.00 kg to appear.
3
Step off the scale and pick up the baby
or animal, then step on the scale again.
Within ten seconds after 0.00 kg and the
are displayed, step on your scale with the baby
or animal. Remain still during the measurement
until the mark is displayed.
4
The weight of the baby or animal can
be read after the
The scale is turned off automatically after
approximately five seconds.
5
Step off the scale.
mark
mark is displayed.
- 5 -