Axminster AWHBS350N Instructions Manual page 10

Assembly
Mounting the saw table
The saw table can be fitted without removing the blade, however, if you would feel more comfortable not
having to manoeuvre the table around the blade (the table is quite heavy), remove the blade by opening
the top and bottom covers, release the tension on the blade by backing off the tensioning wheel
Fig 1
Remove the fence rail and put safely aside.
Fig 3
Remove the butterfly bolt & washer beneath the table, slide the blade through the table slot & lower the
table, guiding the threaded bolt through the hole in the tilt quadrant housing.
Fig 4
Replace the butterfly bolt & washer you removed
earlier, and tighten.
Remove the table stabilising bolt
Replace the table stabilising bolt and
re-attach fence rail. Replace the table insert.
10
Fig 2
and table insert.
Fig 3a
Fig 5