15. Attach the Curl Pad (20) to the Curl Post (13)
with two M6 x 20mm Screws (41).
16. Attach a Curl Bumper (66) to the Curl Bar (31)
with an M4 x 16mm Screw (57).
Attach the Curl Bar (31) to the Leg Lever (18)
with the Curl Bar Pin (28). Then, attach the
tether on the Curl Bar Pin to the Leg Lever with
an M4 x 16mm Screw (57).
17. Make sure that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in ADJUSTMENTS starting on the next page.
15
20
16
31
66
57
18
57
28
11
13
41