Auto Shut-Off; Information Mode; Grip Heart Rate - Schwinn 126 Upright Bike Owner's Manual

USING THE 126/226 COMPUTER
Auto Shut-Off (Sleep Mode)

The console will automatically shut off in approximately 2 minutes without
use or input. There is no on/off switch. (Press any button to power up the
console and "ENTER PROGRAM" appears in the alphanumeric display.)

Information Mode


The computer enables you to switch between English or Metric units by
pressing and holding the UP and DOWN buttons simultaneously for 3
seconds. Use the UP or DOWN button to select "ENGLISH" or "METRIC"
and press ENTER to confirm. The computer will enter the Information
Mode. In the Information Mode, by following the displayed menu and
prompts, you will be able to:
Select ENGLISH measurement units which sets the computer for:
• Miles
• Miles/hour
• Pounds
• Inches
Or select METRIC measurement units which sets the computer for:
• Kilometers
• Kilometers/hour
• Kilograms
• Centimeters
See Total Distance
See Total Hours
Press ENTER and then the software version will display. Press ENTER again
to exit the Information Mode and the computer will bring you to the "ENTER
PROGRAM" mode.

Grip Heart Rate


This Schwinn ® bike is equipped with grip heart rate sensors located on
the handlebars. You must contact these sensors with both hands so the
computer can detect your pulse. The computer uses information detected
by the grip heart rate sensors for many of the software features. Make sure
you are griping the pods and look for the flashing "heart" icon and pulse
rate located on the lower right portion of the LCD display (to the left of the
CYCLIST icon) indicating that a pulse signal is being received. If there is no
display please see the section titled "IMPORTANT Things You Should Know
Before Exercising" for more information.
15