Adjust the Screen Angle (K2-T-SERIES and K3-T-SERIES)
1
Loosen
2
Tighten
Position the Cables
Position the power cord and other cables so they do not interfere with the Mounting Plate
or Screen Mounting Brack ets. If necessary, wrap any excess cord around the hooks on both
Rev00
You can adjust the screen angle using the knobs located on the
outside edge of each Screen Mounting Bracket.
Loosen the knobs on both Screen Mounting Brackets by turning
each knob counter-clockwise one full turn.
Adjust the TV to the desired angle. Holding the TV in place,
tighten the knob closest to you. Tighten the other knob.
Verify that you have fully tightened both knobs.
ends of the Mounting Plate.
www.k2mounts.com
14