Adjust The Screen Angle (K2-T-S And K3-T-S); Position The Cables - K2 Mounts K2 Series Manual

Adjust the Screen Angle (K2-T-S and K3-T-S)

You can adjust the screen angle using the knobs located on the outside
edge of each Screen Mounting Bracket.
1. Loosen the knobs on both Screen Arms by turning each knob
counter-clockwise one full turn.
2. Adjust the screen to the desired angle. Holding the screen in place,
tighten the knob closest to you, then tighten the other knob.
3. Verify that you have fully tightened both knobs.

Position the Cables

1. Position the power cord and other cables so
they do not interfere with the Mounting Plate
or Screen Arms.
2. If necessary, wrap any excess cord around the
hooks on both ends of the Mounting Plate.
www.k2mounts.com
Loosen
Tighten
11