Attach The Screen Mounting Brackets To The Tv - K2 Mounts K2-F-Series Installation Manual

Attach the Screen Mounting Brackets to the TV

Unplug all cables from your TV, and then la y the TV scr een- do wn on a flat, soft surface, such
as a table covered with a blank et. Make sure the surface is not abrasive, so you do not damage
the screen or bezel. Be sur e to fully support the screen, but hang an y pedestal-style stand
over the edge.
Remove the existing stand fr om the back of the TV so that the mounting holes are exposed.
Refer to y our TV's User Guide for more information.
Warning:
you could damag e your TV
same distance fr om the top of the TV.
K2-F-SERIES and K3-F-SERIES
Top
Left
M5 Screw
Screen Hardware Kit. If the scr ews do not feel secure in the TV mounting holes, try using
the screws that originall y came with the TV . You must securely fasten the Screen Mounting
Brackets to the TV.
11
If you do not position the Scr een Mounting Brackets correctly,
Be sure the top edges of both brackets are the .
Place the flat surface of the Left and Right
Screen Mounting Brack ets on the back of the
TV, lining up one hole in each brack et with a TV
mounting hole . .
Center
Be sure to use the same hole on both Screen
Line
Mounting Brack ets, so that the top of each
brack et is the same distance from the top edge
of the TV. The brackets should be roughl y
centered top-to-bottom.
Using the Phillips scr ew driver, attach the
Screen Mounting Brack ets to the TV using the
hardware and instructions provided in the
www.k2mounts.com
Rev00