Hang The Tv On The Mounting Plate - K2 Mounts K2-F-Series Installation Manual

Hang the TV on the Mounting Plate

Using two or more people, pick up the TV and tilt the top edge to ward the wall at the top of
the Mounting Plate. Move down the TV until the upper (longer) hooks engage the top of the
Mounting Plate, then rotate the bottom of the TV until the lower (shorter) hooks are beneath
the Mounting Plate.
Side View
Move the TV slightly left or right so it is in the pr oper position on the wall, and then tighten
the M5 Screw towards the Mounting Plate using the Philips screwdriver. This will prevent the
TV from moving up on the Mounting Plate.
Verify that you cannot pull the bottom edge of the TV away from the wall. If you can, the
Screen Mounting Brackets are upside down. Remov e the TV from the wall and re-install the
Screen Mounting Brackets.
Warning:
before you release the TV. Failure to do so could result in property
damage or personal injury .
13
1
2
3
4
: Make sure to "hook" the screen onto the mounting plate
www.k2mounts.com
2
1
3
Rev00