K2 Mounts K2-F-Series Installation Manual page 5

Find Screen Bracket Screws
Find the screws from this hardware kit that best fit your TV. Note that there are screws
with four different diameters: M4, M5, M6, and M8.
Determine which of these thread diameters should be used by gently threading one
of each diameter scr
Only thread these screws by hand, and DO NOT force a screw into the mounting hole.
After finding the correct diameter, determine the screw length. If your TV has a
flat back, the shorter length should be used. If your TV has a curved back, or if the
mounting holes are recessed in a slot or channel, use the longer length of the
appropriate diameter screw.
Use only the set of four screws that fits your TV. The rest are not needed to attach the
Screen Mounting Brackets.
Find Other Hardware
Next select the washers that match your screw
diameter; for example, if the M8 screws match your TV,
select the M8 lock washers; if the M4 scr ews match,
select the M4 washers and the M4 lock washers. If you
are using long M6 or M8 screws, you will also need the
spacers.
You only need this hardware to attach the Screen
Mounting Brackets. The rest of the hardware is not
needed.
Your hardware should be installed as shown at right.
Don't include the Spacer or bottom Screen Bracket
W asher if you are using a short screw.
Attach the Screen Mounting Brackets to the TV as
shown in the Installation Manual.
Rev00
ew into a rear mounting hole , until you find the appropriate size.
www.k2mounts.com 4